# Calibration requirement package IRDY-F-000009

- Calibration evidence received: `0`
- Readiness status: `NOT_VERIFIED`

Source registry: `instrumentation_calibration_readiness_registry.csv`

The source record below is reproduced from the approved Stage F payload without changing its requirements. This dispatch artifact records preparation only. It does not represent dispatch, receipt, execution, acceptance, or gap closure.

## Approved Stage F source record

```json
{
  "Instrumentation_Readiness_ID": "IRDY-F-000009",
  "Instrumentation_Requirement_ID": "IREQ-E-000009",
  "Test_Work_Order_ID": "TWO-F-000009",
  "Instrument_Type": "LOAD_CELL|DISPLACEMENT_SENSOR|THERMOCOUPLE|PRESSURE_SENSOR|DAQ",
  "Required_Calibration": "TRACEABLE_CALIBRATION_AND_PRE_USE_CHANNEL_CHECK_REQUIRED",
  "Calibration_Record_Required": "REQUIRED_BEFORE_TEST_START_OR_DOCUMENTED_NOT_APPLICABLE_FOR_NON_MEASUREMENT_SYSTEM",
  "Calibration_Validity_Check": "IDENTIFIER_SCOPE_RANGE_DATE_EXPIRY_TRACEABILITY_AND_CHANNEL_APPLICABILITY_CHECK_REQUIRED",
  "Setup_Verification": "MOUNTING_ALIGNMENT_FIXTURE_SENSOR_CABLE_AND_ADDED_MASS_CONTROLS_REQUIRED_AS_APPLICABLE",
  "Range_Check": "VERIFY_AGAINST_STAGE_E_REQUIREMENT:TO_BE_DEFINED_BY_QUALIFIED_TEST_PROCEDURE",
  "Resolution_Check": "VERIFY_AGAINST_STAGE_E_REQUIREMENT:TO_BE_DEFINED_BY_QUALIFIED_TEST_PROCEDURE",
  "Bandwidth_Check": "VERIFY_AGAINST_STAGE_E_REQUIREMENT:TO_BE_DEFINED_BY_QUALIFIED_TEST_PROCEDURE",
  "Mounting_Check": "SENSOR_LOCATION_ORIENTATION_ATTACHMENT_CABLE_ROUTING_AND_ADDED_MASS_CHECK_REQUIRED_AS_APPLICABLE",
  "DAQ_Channel_Check": "CHANNEL_MAP_EXCITATION_POLARITY_ZERO_SHUNT_OR_REFERENCE_AND_METADATA_CHECK_REQUIRED_AS_APPLICABLE",
  "Uncertainty_Record_Required": "DOCUMENTED_MEASUREMENT_UNCERTAINTY_BUDGET_REQUIRED",
  "Readiness_Status": "NOT_VERIFIED"
}
```